The smoke lens actually let more light in as they are more translucent than the white lids. So for use with the # FV807350 I'd recommend the part # FVU1500WH since you are wanting less sunlight and heat. view full answer...
In order to pick out a direct replacement for the landing gear on your trailer we would need to know the distance between the mounting brackets. Otherwise you could just have the brackets removed from your trailer by a qualified welder and then install the brackets that come with the Reese Bulldog Tandem Landing Gear Set # RP500708 that you referenced. This would be a great option for your 2005 Keystone Everest 293P. Either way this landing gear set would work well for you, you just might... view full answer...
That's a pretty common problem for Lippert style landing gear boxes. Based on that I know that the best option for you would be the aluminum gear box part # LC276602. This is a replacement that fits your trailer and since it's aluminum it will be more resilient to failure. view full answer...
Dexter has changed part numbers over the years but since we know you have Dexter 6k axles the Nev-R-Adjust assembly set part # 23-458-459 is a fit and will work great. This is a self adjusting set (left and right) that you'll never have to worry about brake adjustments.
I attached an install video for this for you to check out as well. view full answer...
For a set of self adjusting brake assemblies that will fit the hub/drums of your 2006 Keystone Laredo 25RK based on the info you mentioned the part # 23-458-459 would be what you'd want.
If you needed a new hub/drum the part # AKHD-655-6-EZ-K would work as well. This is pre-greased too which means you'd be able to install it without having to pack bearings. view full answer...
I would recommend using the Andersen Rapid Jack # AM3620 over the FloTool RhinoRamps # FT11909MI. You will have issues with the length of the RhinoRamps and the 2nd axle trying to move up and sit on the ramp due to its length. The Andersen is much shorter at 17" versus 35-1/2" of the RhinoRamps.
The Andresen unit also takes up less room and can serve multiple uses as it can work as a wheel chock if needed. view full answer...
I would be happy to help!
Since your 2018 Keystone Cougar 311 RES 5th wheel with tandem 5200lb Dexter axles has the Dexter 072-097-00 leaf springs currently installed the 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long # e34SR you were looking at will be an exact replacement for you.
These leaf spring are the same length at 25-1/4" and the 6000lb capacity of the # e34SR will give you the extra support you are looking for.
For replacement U-Bolts I recommend four of... view full answer...
The Rubber Wiper Seal, # SR38FR that you identified is 15/16" x 2-7/8". We have the Rubber Wiper Seal with Track for RV Slide Out, # SR59FR that is a close dimension at 2-13/16" view full answer...
The Torklift GlowSteps part # TLA8004 is the kit you need since you said your doorway to ground measurement is 36 inches. This has a height range of 32-1/2" - 44" so your height of 36 inches falls perfectly in that.
The landing gear doesn't have to be removed/installed everytime it's used so you wouldn't have to worry about extra steps involving them when going in and out of the RV. Basically they pull out and you are set.
If you check out the 1:30 mark of the video I attached to this... view full answer...
We do offer bolt-on spare tire carriers like the Fulton # FSTC1000301 which provides a bit over 7-inches of lift for better ground clearance. In many cases this will provide much better clearance than a simple u-bolt type carrier like # CE22007Z-11050-2. All spare tire carriers, including the hitch-mount type like # C31006, can be seen on the page I linked for you. view full answer...
The Draw-Tite Multi-Fit Motor Home Trailer Hitch, 47" - 71" wide # 82201 has a maximum tongue weight of 300 lbs. If you have a frame that is shorter then the Draw-Tite # 5350 is a great option with a 500 lb tongue weight.
If you are unsure of the width of your trailer frame the Curt Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703 is a great option that with either bolt or weld on and is rated for 350 lbs tongue weight. If you have a frame between 18-51 inches... view full answer...
The Jensen Motorhome Digital Media Receiver # JWM60A that you referenced is designed to connect to a TV using RCA cables. The left and right audio channels will be the red and white and the video will then be yellow. If those are connected properly make sure the TV side has the connections matched properly and both the Jensen and your television are on the right channels. view full answer...
To replace a Dometic unit with a Furrion AC unit you would want the part # FR42PV which will bolt right up to the current air distribution box you have and connects to same wiring for an easy and simple install. A lot of people really like how quiet and cold the Furrion units are so this should work really well. view full answer...
Most Keystone fifth wheel trailer have standard Lippert/Venture/Stromberg style landing gear sets so the motor part # LG-142178 that you referenced should be the right kit. If you have something different let me know. If what you have looks like the picture I attached this would be the correct motor. view full answer...
In order to replace the 7-way trailer connector on a 5th wheel with the EZ Connector you must cut off the old one and splice on the new one such as the EZ Connector Magnetic 7-Way Trailer Connector part # 319-S7-07 as there isn't a plug and play adapter. view full answer...
You have a couple options, but for an adapter designed to convert from your B and W Turnoverball gooseneck hitch to a set of industry standard fifth wheel rails you'd just need the Curt X5 adapter part # 16310 which would be a great option if you have a fifth wheel hitch already.
If you don't have a hitch currently your best option would be a Companion hitch which would fit your Turnoverball gooseneck directly with the # BWRVK3400 for a slider hitch (if you have a short bed truck), or... view full answer...
For the Westlake ST235/80R16 Radial Trailer Tire # LHWL401 you have I recommend setting your TPMS temperature alarm for 158 degrees Fahrenheit. This is a common temperature used with most TPMS like the TST TPMS for RVs # TST-507-FT-6-C as individual tires will not have a temperature rating. Most tires will see a temperature increase of around 50 degrees Fahrenheit from the ambient air temperature. Of course this will vary based on correct air pressure in the tire, grooves in tread, road... view full answer...
The part # 37207-31235 will give you 12 feet of hose that will attach to the quick disconnect you have on your RV. For an adapter then we have the part # 401132-MBS which gives you a male quick disconnect on one side and a 1/4 inch MPT fitting on the other like you described needing. view full answer...
I do have an option for your 2013 Keystone Cougar 325SRX TH.
We have the Trailer Axle Beam with Easy Grease Spindles # e45GR which has the 5200lb rating you need, along with the 86-1/2" hub face measurement you are needing, and then a local welder can remove the current spring seats that are 71-1/2" apart and move them to 68-1/2" apart.
This axle uses the standard 5200lb bearing combination so if your current brakes and hub and drum assemblies are in good shape they can be reused or you... view full answer...